Bergquist pre-applies Bond-Ply 450 to PCBs

Found this interesting article regarding Bergquist Edited by the Electronicstalk editorial team Feb 23, 2009

The reflow-resistant thermal interface tape saves product manufacturers from manually applying thermal interface material after assembly.

This streamlines production, allowing to quickly bond the metal-core PCB to a heatsink avoiding laborious attachment of individual screws or clips.

The pre-applied Bond-Ply 450 tape is designed to retain its adhesive properties after passing through reflow soldering, allowing the assembly to be directly attached to a heatsink.

Release of the back-side liner is also unaffected by soldering temperatures.  It is available only as a pre-applied thermal interface for T-Clad circuits. It is 0.127mm thick and is rated for continuous use from – 30 to +120C.

High bond strength to low-energy surfaces such as aluminium heatsinks and a variety of plastics assures secure assembly, even for products used in harsh environments.  The Bond-Ply 450 is available in both standards as well as customised T-Clad circuits.

These include outlines such as power rails and star- or square-shaped LED boards, as well as a limitless variety of sizes for use in markets such as architectural, automotive, medical, military, signage or aerospace.

One Response to “Bergquist pre-applies Bond-Ply 450 to PCBs”

  1. [...] back in March 2008, there had not been another project of its size available online. So whenBergquist pre-applies Bond-Ply 450 to PCBs Solid State IncThe reflow-resistant thermal interface tape saves product manufacturers from manually applying [...]

Leave a Reply